Passenger cars

Categories
Image
Description
Number detail
Quantity to order
1

The tool kit INT 01-6 kit is a specially designed tool for the loading mechanism preload tester IN 06.001 (for each type of clutch).
(more…)

2

This automated welding machine has two welding torches with automatic approach to the body of torque converter being welded.
(more…)

3

KINERGO engineers recommend this item to all service centers, which repair automatic transmissions made in France.
(more…)

4

Alignment check stand allows rapid and precise measuring of such parameters of the torque converter as its overall height, projecting part height of pump hub, hub run-out, pump wheel body run-out.

5

The machine is designed to perform the same functions as the SV 10.005, but it does not have an automated welding torch drive; instead, a bracket with three axes is built in, which fixes the position by turning one clamp.
(more…)

6

including 1 splinted adapter, 3 blanc parts and 7 centering adapters This device was designed for the Torque Converters balancer SB 02.350 and is used to fix the internal parts of the Torque Converter while balancing.
(more…)

7

Designed to fix the impeller hub when welding.
(more…)

8

Adapters are designed for use in NF 08.400 piston bonder
(more…)

9

The principle of operation of the device is based on thermal radiation through physical contact. Tubular electric heaters (TEN) are used as a radiation source.
(more…)

10
This automatic machine was developed for large industrial enterprises repairing large quantities of the same type of torque converters. This machine is capable of welding to carry out welding of torque converters up to 450 mm in diameter and up to 300 mm in height. The machine is equipped with two welding torches with automatic […]
11

In the design of this device, we used the property of infrared thermal radiation to penetrate deep into ferrous metals, thereby bypassing the problem of uneven heat transfer in the case when thermal energy is transmitted by a contact method and depends on the uniformity of the clamp and the plane of contact.
(more…)

12

This installation model is the budget version in the SV line.
This model has a low price, but the price does not affect the quality of the machine, and its productivity is quite enough to repair 250 - 300 gas turbine engines per month for an eight-hour shift.
(more…)

13
This stand SB 02.350 will allow you to check and balance any torque converter with guaranteed accuracy.
14
The unit is used for precise welded connection of two halves of the torque converter housing with specified tolerances for axial runout and internal thermal gap.
15
In the design of this device, we used the property of infrared thermal radiation to penetrate deep into ferrous metals, thereby bypassing the problem of uneven heat transfer in the case when thermal energy is transmitted by a contact method and depends on the uniformity of the clamp and the plane of contact.
16

All units of the torque converter operate in modes that cause the inevitable thermal expansion of the housing and internal parts.
(more…)

17
Allows you to quickly and conveniently identify places of possible leaks along welded joints or other places of damage to the integrity of the torque converter housing (pumps, vacuum systems).
18
Torque converters of modern automatic transmissions from the well-known world manufacturer ZF have a sliding lock with a pre-tightened clutch mechanism.